• Welcome to the Kancolle Wiki!
  • If you have any questions regarding site content, account registration, etc., please visit the KanColle Wiki Discord

Changes

Jump to navigation Jump to search
no edit summary
Line 16: Line 16:     
I estimate the total cost for this cosplay to hit possibly in the ~$500 range depending on how fancy I decide to make this. Again, this is by far my largest and most ambitious project yet.
 
I estimate the total cost for this cosplay to hit possibly in the ~$500 range depending on how fancy I decide to make this. Again, this is by far my largest and most ambitious project yet.
 +
 +
===Materials===
 +
 +
Foamboard
 +
*This is the type you can buy at any craft store such as [http://www.michaels.com/elmers-acid-free-foam-board-2-count/10390078.html this]. Make sure to buy these in-store because these are hella expensive if you buy online. If you buy a non-brand one like Elmer's from your local craft store, you can get these for even cheaper. I get mine for like $4 or $5 per board. I just got a bunch when they were on sale so I paid $3.50 each kek
 +
 +
Cardstock paper
 +
*This is essentially just "thicker" paper. Look at my day 1 post and I have a pretty good explanation on what type I buy and how to use these.
 +
 +
Wood of Various Sizes
 +
*I'll buy dowels, square dowels (whatever they're called), boards and various other cuts. Basically whatever I deem necessary.
 +
 +
Paints
 +
*Generally I just buy a shitton of spray paint and some masking/painting/marking/whatever tape to get certain types of paint patterns. More on this whenever I start painting my props.
 +
 +
Glue
 +
*Elmer's glue and wood glue along will be my primary weapons of choice with the occasional assistance from the clear Gorilla glue and some hot glue when the occasion calls for it. I rarely use, but have needed, super glue in the past for small stuff.
 +
 +
PVC
 +
*Lots and Lots and Lots and Lots of PVC. For Furutaka my primary cuts are 0.5inch, 0.75inch, 1inch, 1.25inch and 1.5inch cuts.
 +
 +
Screws, Nuts and Bolts
 +
*I generally stick to various lengths of 1/4th inch screws with plenty of nuts and bolts to accompany. If you go to Home Depot, you can get like a box of 1/4th inch washers for $5 and 1/4th inch nuts for like $10 so I just suggest getting those. They're generally 100-packs.
 +
 +
===Tools===
 +
Power drill
 +
*I just bought this for the first time in my cosplay career and HOLY FUCK WHY DID I NOT INVEST $40 INTO A CHEAP ONE. THESE ARE A FUCKING LIFE CHANGER DON'T SKIMP OUT IF YOU CAN AFFORD IT. POWER DRILLS MAKE LIFE 100x EASIER WHEN DRILLING HOLES. Like, I used to hand drill holes by screwing small drillbits and progressively working my way up with thickening diameters and it's take like 5 minutes just to get one hole done... with this magical tool, I can suddenly get a hole in 15 seconds. It's fucking amazing.
 +
 +
Saw
 +
*Get a handsaw, the type that looks like a stubby U with a saw band attached across the two legs.
 +
 +
Wrench and Pliers
 +
*If you don't have these, good fucking luck tightening the screws and nuts lol
 +
 +
Some Source of Heat
 +
*I just use my stove. This is for heat bending PVC.
 +
 +
Vice
 +
*These are so fucking helpful for keeping something in-place while you work on it. You'll notice that I'm using this all the fucking time.
    
===IMGUR LINK FOR THE IMAGES===
 
===IMGUR LINK FOR THE IMAGES===
Line 33: Line 72:     
{{:User:Remi_Scarlet/Blog/FurutakaKaiNiCosplay/Day6}}
 
{{:User:Remi_Scarlet/Blog/FurutakaKaiNiCosplay/Day6}}
 +
 +
{{:User:Remi_Scarlet/Blog/FurutakaKaiNiCosplay/Day7}}
     
2,922

edits

Navigation menu