User:Remi Scarlet/Blog/FurutakaKaiNiCosplay

Well, here goes nothing.

What The Fuck Is This

I'll be making these blog posts as I work on my Furutaka Kai Ni cosplay props and whatnot. The posts will be made with my progress, process, description/explanation and some random musings.

Feel free to message me on Facebook if you want to ask me questions about it or shoot me a message on our IRC, #kancollewiki@irc.esper.net. Alternatively, feel free to use the discussion page on this page to talk.

That said...

Goals and Whatnot

So obviously with any cosplay, there are a lot of levels of "completion" and whatnot. For this cosplay, I plan on making this one of my most ambitious and difficult cosplays to date. Some things I plan on incorporating include but are not limited to:

  • Rotating and controllable cannons via button input on my hands
  • Retracting barrels to emulate the cannons "firing"
  • Firing sounds via a miniature speaker system
  • POSSIBLY fake "smoke" from the barrels upon "firing"

I estimate the total cost for this cosplay to hit possibly in the ~$500 range depending on how fancy I decide to make this. Again, this is by far my largest and most ambitious project yet.

Materials

Foamboard

  • This is the type you can buy at any craft store such as this. Make sure to buy these in-store because these are hella expensive if you buy online. If you buy a non-brand one like Elmer's from your local craft store, you can get these for even cheaper. I get mine for like $4 or $5 per board. I just got a bunch when they were on sale so I paid $3.50 each kek

Cardstock and Poster Paper

  • This is essentially just "thicker" paper. Look at my day 1 post and I have a pretty good explanation on what type I buy and how to use these. I utilize the poster paper for larger portions that require reinforced paper like the smoke stack backpack.

Wood of Various Sizes

  • I'll buy dowels, square dowels (whatever they're called), boards and various other cuts. Basically whatever I deem necessary.

Paints

  • Generally I just buy a shitton of spray paint and some masking/painting/marking/whatever tape to get certain types of paint patterns. More on this whenever I start painting my props.

Glue

  • Elmer's glue and wood glue along will be my primary weapons of choice with the occasional assistance from the clear Gorilla glue and some hot glue when the occasion calls for it. I rarely use, but have needed, super glue in the past for small stuff.

PVC

  • Lots and Lots and Lots and Lots of PVC. For Furutaka my primary cuts are 0.5inch, 0.75inch, 1inch, 1.25inch and 1.5inch cuts.

Screws, Nuts and Bolts

  • I generally stick to various lengths of 1/4th inch screws with plenty of nuts and bolts to accompany. If you go to Home Depot, you can get like a box of 1/4th inch washers for $5 and 1/4th inch nuts for like $10 so I just suggest getting those. They're generally 100-packs.

Craft Foam and Styrene Sheets For making some portions like the food/shin armor and the tubings around my leg that hold the crane and torpedo tubing, I utilized craft foam and styrene to mold them. This Website has a wonderful tutorial on craft foam and styrene armor-making.

Tools

Power drill

  • I just bought this for the first time in my cosplay career and HOLY FUCK WHY DID I NOT INVEST $40 INTO A CHEAP ONE. THESE ARE A FUCKING LIFE CHANGER DON'T SKIMP OUT IF YOU CAN AFFORD IT. POWER DRILLS MAKE LIFE 100x EASIER WHEN DRILLING HOLES. Like, I used to hand drill holes by screwing small drillbits and progressively working my way up with thickening diameters and it's take like 5 minutes just to get one hole done... with this magical tool, I can suddenly get a hole in 15 seconds. It's fucking amazing.

Saw

  • Get a handsaw, the type that looks like a stubby U with a saw band attached across the two legs.

Wrench and Pliers

  • If you don't have these, good fucking luck tightening the screws and nuts lol

Some Source of Heat

  • I just use my stove. This is for heat bending PVC.

Vice

  • These are so fucking helpful for keeping something in-place while you work on it. You'll notice that I'm using this all the fucking time.

IMGUR LINK FOR THE IMAGES

Since looking at images on wiki is terrible, I'll ALSO be uploading all images used here onto the following imgur link so it's more browsing-friendly. All images are uploading in order of newest to oldest.

http://imgur.com/a/PEyTY

Day 1

Date: 5/21/15
Time spent: ~3 hours

Show/Hide Day 1

So as with all good things, there are some boring parts that come with it as well. That's usually the beginning with making cosplay props :(

 
As you can see, this is an extremely sophisticated shot of a piece of paper. Very intriguing.

Paper Layering

On the first day, there were two primary things I got accomplished. Well, to be specific I started on both of them. With my style of prop making, I utilize rigid foam boards (The kind you can buy from any art store, not the lionboard/EVA boards/more rare varieties) and paper.

"Whoa, whoa, whoa. Paper?", you might ask me. People who don't do cosplay props might not realize, but paper is actually not that uncommon a material to be used as one of the primary materials. Here's the trick. You have to get some of the thicker lines of paper, the kind you usually use for business cards or fancy letters and papers. These might go by the name of "cardstock" paper or just by paper weight classifications.

 
I generally use papers in the middle half range from 120GSM to 175GSM. I believe I'm currently using GSM 145. Not entirely sure because I just stole a whole packet from my mom's office kek

What I do with these papers is that depending on the required strength of the object I'm making out of this paper is, I'll layer it two to three times via spreading a thin layer of glue on one sheet, layering another clean sheet on and letting it sit under pressure for at least 24 hours. It's crucial that the layer of glue you apply is as thin as possible while making sure you don't leave any air holes, eg spots that don't have glue. If your glue is too thick, then it'll never dry and when it does, it'll be like a solid layer of glue. On the other hand, if your glue is too thin and you have pockets of no glue, then when you start cutting and using the layered sheets, you'll get areas where the sheet is... well, not combined into one layer. Also be sure to get the edges of the papers. These are important too!

Examples can be seen on the second and third images on the left as well as the second image on the right. Personally, I find using popsicle sticks that you can buy a bag for $0.99 at an arts and crafts store to be a great way to spread the glue very evenly. As for the glue, as shown in the picture, I just get a tub of Elmer's glue and it works like a freaking charm. Great stuff.


Planning and References

So now that's all good and done, what about actually planning the actual making of the props? Staring at paper dry is hardly anyone's definition of fun cosplay making. Well for starters, since I'm recreating a cosplay of a character, the logical thing to do is simply look up reference images. The key here is that you want to get a really good feel for the character's look from all possible angles. Unfortunately, this isn't always possible with just official sources. Kancolle is a great example of this due to the limited "official" art available for most characters. This is where you have to use some imagination in combination with fan art to fill in the gaps of what the official sources might be lacking in terms of angles.

Basically, before you start anything you should have a pretty good idea of the general location, size, look, feel and workings of all the major components of a character's propset. For me since I'm doing Furutaka kai ni, I needed to be able to visualize what her arm cannon, shoulder cannon, exhaust backpack thing, torpedo racks, boots, etc all looked like, how they aligned with each other and how it all worked cohesively as a unit.

 
Seeing this many adorable Furutakas across so much screen real estate is definitely bad for my heart

Once I got an idea of that, I started sketching out some diagrams based on official art to get a reference for size and dimensions of all the major components I'd need. I haven't finished doing this step yet, but I've made some progress on the arm cannons for now. For the cannon, I did a combination of tracing as well as just visualizing test dimensions and seeing what seemed to "work" best. Eg, when I look at the official art I know that the front cannon should have a certain feel with its shape and size. That said, I guesstimate what kind of proportions/dimensions would look appropriate on me (my arm) and visualize these dimensions and shapes on my arm. I keep adjusting until I find a visualization I think works well and write them down. Another important point is that with anything you trace, assuming you trace well, the proportions of the trace will technically be the most "accurate" and "official", so just make them proportional to your own body as it is to the character. Eg, I measured my should to the first knuckle on my fist to be about 26 inches. Since I had a trace of the entire arm cannon which started at the first knuckle and ended at the shoulder, I just set that as my standard. The trace was almost exactly four inches long so I scaled it so that one inch on my scale trace was approximately 6 inches in real measurements. From here, everything else worked out via proportions to get a rough dimension estimate for the rest of the arm cannon.

 
The funny thing is that I hadn't drawn any graphical/artistic/anything since I did the exact same thing for Taihou last summer.

And for Day 1, that was about the extent of how far I got. I expect to continue working on diagrams and dimensions for Day 2 and getting a rough estimate on the amount of materials I need as well as maybe even starting on actual material work.

Day 2

Date: 5/23/15
Time spent: ~0.5 hours

Show/Hide Day 2

So I actually didn't get to work on this a whole lot today cuz I was busy playing other games and frantically finishing up my completely neglected weeklies, but yeah. Running 2-2 and 2-3 like 10 times and not getting sent to a single node with a transport ship is really frustrating. Especially when you're literally one kill away from finishing the quest.

Anyway, so in the ~30 minutes I actually worked on the cosplay, I decided to try and plan out the sketches a bit more. This time, I worked on the torpedo mount on Furutaka's left leg.

 
Ignore the completely disproportionate measurements I have. I drew first, THEN put down numbers, kek

To summarize, what I'm thinking of doing here is getting one inch PVC pipes for the torpedoes themselves. I'll likely get a set of 1.5" PVC and heat bend them to be smaller in diameter so they snugly fit the 1" diameter ones and use that as the torpedo housing. On top of this, since the torpedo mount connector (the thing that connects the mount to Furutaka's leg) will need to be rigid and resistant to stress and strain, I'll likely make the actual housing component out of a stronger and more durable material. Perhaps I'll do a combination of a carve-able expanding foam and cutting out a torpedo housing for it and have a wooden flat base to connect it onto the actual mount connector. That probably made no sense. Gah, I usually just #yolo these things and don't bother explaining to anybody so trying to explain the method to my madness in words is hard. Also I'm terrible at drawing so the diagram probably doesn't help much.

Basically, torpedo mount will have two primary components and a couple of sub-components on one of the primary components. First component is the "rigid torpedo casing" which will be made from the sub-components of expanding foam and wood, likely held together with glue and a few screws/washers/nuts. The second component will be made from more fragile materials like the foamboard and layered paper. In the final product, the foam sub-component shouldn't be visible from the outside. The torpedo itself will likely be crafted from 1-inch PVC pipes and the housing that cups around the torpedo will be made from heat-bent 1.5-inch PVC piping.

This should make a lot more sense when I actually start making the stuff and have pics to show what I mean. Words are hard... especially at 10am when I haven't slept yet. I should go sleep now.

Day 3

Date: 5/24/15
Time spent: ~2 hours

Show/Hide Day 3

Purchasing and Fire

So today I went out and bought some PVC piping that would act as various parts of the propset as per yesterday's sketches. All in all, I figured that I would need about 50 inches of 1.25inch diameter piping, 50 inches of 1inch diameter piping, 60 inches of 0.5inch diameter piping and some ~20 inches of 0.75inch diameter piping as internal couplings for the pipes. I also bought some PVC caps which will act as the torpedo heads. While at Home Depot, I also decided to go ahead and stop skimping out and buy a real saw. Let me tell you, using an actual saw meant for cutting pipes beats the hell out of using those cheap arts and crafts knives.

 
Pictured: A lot of pipes that were a bitch to carry around without a cart in Home Depot and without a car from the store to back home.

So the idea for today's pipe purchases were so I had the materials needed for all the long pipe-y parts of the cosplay on hand. This includes turret barrels, turret barrels, more turret barrels and some torpedoes. Keep in mind, Furutaka kai ni has three cannons and a torpedo mount. That's six barrels and four torpedoes, equalling 10 long stick things. According to my sketches and calculations (which slightly changed from Day 2's), the barrels would be between 8.5 and 9.5 inches long and the torpedoes would be about 15 inches long.

A cool note about the 1.25inch inch piping is that they're just large enough to comfortably, but not too snugly fit the 1inch pipings. What I'll be using them for is the torpedo mount's torpedo housing. If you look at the images of torpedo mounts, you'll notice that there are thin half-pipe encasings on the upper half of the torpedoes. Due to the naturally well-fitted and shaped nature of the 1inch and 1.25inch pipes, I will be doing just that with the two pipes. Due to this, I have also changed my plans about the expanding foam encasing for the torpedoes. Instead, I will likely simply have a wooden base that's sturdy to connect the torpedo mount to my leg and use standard foam board beyond that with holes cut out to snugly fit in the 1.25 inch pipings.

Anyway, so in terms of actual progress with making stuff, I confirmed that I could use heat bending to soften the PVC piping to fit with each other. As it stands, without heat bending you can't fit a 0.75inch PVC into a 1inch PVC as they're just slightly off-sized. However, with application of heat to the PVC, you can soften it enough to "force" the smaller pipe into the larger one. Given enough pressure and once the pipes cool, they'll basically be lodged in there for good so no worries about it falling out.

 
The tip is a bit flat and I'm trying to think of a way around it but... we'll see.

If you're wondering why the hell I needed to do this weird pipe fitting thing, it's because I also had a 0.75inch pipe cap which coincidentally has the same outer diameter as the 1inch diameter pipes. That said, I decided to combine the 1inch pipe and 0.75inch pipe cap together to make it look like a single pipe with a cap. Obviously, aesthetic embellishments will be applied to smoothen out the little line where the pipe cap and pipe actually meet and whatnot, but that comes later.


So now that I had confirmed these things fit together, all I had to do was get the torpedo propellers and they'd basically be done!

...Except life isn't that easy, is it?



Torpedo Propellers

So after thinking about how the hell I could make a small-scale yet intricate propeller system for the torpedo, I figured that it's probably impossible to hand craft something that would look nice, be sturdy and be able to fit onto a PVC's piping diameter. Thus, I decided to opt to one of my favorite additions to cosplay, the 3d printer. After deciding that I would likely need to design an print out my torpedo propellers to make them look top notch, I set to work for an hour or so to come up with the following. The first three images are the propeller portion with the torpedo's main body attached for reference. The fourth image is what I would actually be printing.

So with this, I figured my issue with the torpedo is solved. For now, I still need to go and print the parts so we'll see if this works as well as I'm hoping.

I'll likely start thinking and working with the cannons next time!

Day 4

Date: 5/25/15
Time spent: ~1.5 hours

Show/Hide Day 4

So outside of actually just making a working super arm cannon that characterizes Furutaka kai ni a lot, one of the difficulties of making this cosplay is the black cannon that Furutaka has.

 
Mechanical joints and whatnot. One of the challenges with Furutaka kai ni's cosplay.

The problem with this part are the mechanical limbs and joints that connect them. So to actually make this with a mechanical shop isn't too bad since you can machine your individual parts and whatnot. Unfortunately, I'm not a mechanical engineer and even though I do know my basic CAD and whatnot, I have no access to equipment for just machining out my parts (Which would have made life a lot easier, albeit more expensive).

So the majority of today's "work" was actually spent just lying on my bed and staring at the ceiling while thinking "How the fuck.". After about 10 minutes though, I suddenly got an idea. Since I already had plenty of PVC pipes lying around and it was easy enough to go buy more, I decided I would try to tinker around with the PVC piping to see if I could emulate hinge and pin joints with them. After hacking away at PVC with my saw and lighting the pieces on fire over my stove, I finally ended up with something like this for a hinge joint.

 
PVC and screw solution to the hinge problem

So this is actually pretty beautiful in my opinion, the fast prototyping and resultant aesthetic lacking aside. So the amazing this about this is that it basically serves every function I need it to do and that I can actually make it a "stiff" joint, as in I can move it around if I tried but once I let go, the joint will stay "in-place". The "stiffness" can easily be achieved by adding something to increase friction such as adding a layer of duct tape at the connection point of the two pipes and tightening the bolt on the screw a lot. By double nutting the screw, this would ensure that the nuts and resultant pressure wouldn't come loose.

With this solution, I figured out that I can actually make the limbs and hinges work very nicely for a ridiculously cheap cost. Compared to CADing and machining out the parts, just grabbing some PVC pipes, screws and nuts might as well be free by price comparison. The only part I haven't covered here is the pin joint. While the construction of a pin joint itself would be very easy by simply making the same U cuts in the thicker piece of PVC and laying the thinner piece in the U shaped crevice, I would still need to figure out some method of "stiffening" this form of joint. That said, I believe with some clever application of friction-inducing materials and more tightened screws should solve the issue here as well. I'll obviously make updates on this subject once I have a chance to head to Home Depot at the end of the week and go buy more materials.

So with that, here are a couple of photos demonstrating stuff.

Day 5

Date: 5/26/15
Time spent: ~2.5 hours

Show/Hide Day 5

So I went out to Home Depot today and went ahead and splurged $120 on equipment and materials. Also blew $60 at an art store for other materials. Anyway, carrying back near $200 of equipment and materials was not something I would have thought was possible. I feel like I might have dropped a few things along the way.

That said, today I went ahead and continued my work from yesterday by constructing the frame of Furutaka's shoulder cannons. Again, like I said with yesterday's post, this initially posed a large problem for me because I wasn't sure how I could make a joint frame that would be stiff at the joints, be durable, strong and able to hold the weight of the cannon itself. Thankfully, because of what I thought of last night, I figured it'd be worth a shot at trying to execute it. I basically just spent the entirety of today drilling, roasting, rolling and screwing PVC pipes together to get the images below. I won't add much text since what I did is pretty much the same as yesterday, just in more detail and depth. That said, enjoy the pictures. All of my criteria were met with the final frame I constructed so this is an amazing start.

Day 6

Date: 5/28/15(A tiny bit on 5/27/15 as well)
Time spent: ~4 hours

Show/Hide Day 6

5/27

So I'll quickly go over what I did on 5/27/15 since I didn't get a whole lot done. Basically, yesterday was spent clicking around ebay and amazon buying various parts. So things I bought include

  • Knee socks
  • Thigh highs
  • Cotton bodysuit
  • Penny loafer shoes
  • Pleated blue skirt
  • Two 4.1kg-cm rated servo motors

For the servo motors, they have to be able to rotate two barrels that are have two components to them of certain length. The two components have different diameters.

 

Where [math]\displaystyle{ a }[/math] is pipe of diameter 0.5inches and [math]\displaystyle{ b }[/math] is pipe of diameter 0.75inches.
Note that with servo motor ratings, [math]\displaystyle{ kg }[/math][math]\displaystyle{ cm }[/math], it seems that it's just it's torque without the gravity component calculated in. The [math]\displaystyle{ \tau }[/math] I use in the calculations isn't actually torque but it's the same idea so I use the symbol for it, even if it's technically incorrect.
[math]\displaystyle{ CoM }[/math] is Center of Mass

Pipe [math]\displaystyle{ a }[/math] Pipe [math]\displaystyle{ b }[/math]
[math]\displaystyle{ \lambda_a = \frac{100g}{24inches} = 4.16\frac{g}{in} }[/math] [math]\displaystyle{ \lambda_b = \frac{150g}{24inches} = 6.24\frac{g}{in} }[/math]
Given [math]\displaystyle{ \ell_a = 7in }[/math] Given [math]\displaystyle{ \ell_b = 4in }[/math]
[math]\displaystyle{ m_a = \lambda_{a}*\ell_{a} = 24.96g }[/math] [math]\displaystyle{ m_b = \lambda_{b}*\ell_{b} = 29.12g }[/math]
[math]\displaystyle{ d_{{CoM}_a} = \frac{4in}{2} = 2in }[/math] [math]\displaystyle{ d_{{CoM}_b} = 4in + \frac{7in}{2} = 7.5in }[/math]
[math]\displaystyle{ \tau_a = m_{a}*d_{{CoM}_a} = 49.92g }[/math][math]\displaystyle{ in }[/math]
[math]\displaystyle{ \tau_a = 49.92g }[/math][math]\displaystyle{ in*\frac{1kg}{1000g}*\frac{2.54cm}{1in} }[/math]
[math]\displaystyle{ \tau_a = 0.127kg }[/math][math]\displaystyle{ cm }[/math]
[math]\displaystyle{ \tau_b = m_{b}*d_{{CoM}_b} = 219.56g }[/math][math]\displaystyle{ in }[/math]
[math]\displaystyle{ \tau_b = 219.56 }[/math][math]\displaystyle{ in*\frac{1kg}{1000g}*\frac{2.54cm}{1in} }[/math]
[math]\displaystyle{ \tau_b = 0.558kg }[/math][math]\displaystyle{ cm }[/math]

[math]\displaystyle{ \tau_{total} = 0.127kg }[/math][math]\displaystyle{ cm + 0.558kg }[/math][math]\displaystyle{ cm = 0.785kg }[/math][math]\displaystyle{ cm }[/math]

And since I have two of these barrels, I needed a servo motor with at least a kg⋅cm rating of [math]\displaystyle{ 0.785 * 2 = 1.57kg }[/math][math]\displaystyle{ cm }[/math]. Since it's always better to err on the side of caution, I decided to just go overkill and get a 4.1kg⋅cm rated servo.

Shoutout to the Kancolle USA group because I completely forgot how torque worked. It's been a few years kek. And to think I was originally a mechanical engineering major a long time ago.

That said, let's move onto what I actually did today.

5/28

So today, I decided to actually start working on the cannons since I'd been delaying them for a few days now. That said, I didn't really plan too much out other than some basic goals for dimensions. I aimed for about a 12in x 4.5in x 7.5in frame for the body and so I decided to go ahead and run with that. Images will likely serve as better explanation so I'll do that gallery thing again with explanations for the images in the annotation. Again, feel free to look through my Imgur Album for easier viewing of images.

Day 7

Date: 5/29/15
Time spent: ~4 hours

Show/Hide Day 7

So after trying to avoid the problem for a few days, I finally gave in and decided to work on the roofing and walls for the shoulder cannon. Basically the reason I didn't want to start on this so much was because I felt like measuring out and cutting the front wall where the cannon barrels stick out would be annoying since... well, I'll just show a pic.

 
Basically getting the cut from the corner of the top to the corner of the bottom and making sure the cannon barrel has space to move

Something I should also note here that the top piece was inserted after cutting away about 0.25inches of the top from the horizontal support grid. You can see it in the following picture, but the tip of the slope actually covers the thickness of the top foam board. Those words probably made zero sense so just look at the image.

 
Notice how the cut was made so the thickness of the top piece is embedded in.


That done, I had to actually start cutting out test cuts from non-prepared paper to make sure my measurements and whatnot were correct. Remember from day 1 that I had prepared a few sheets of "layered" paper so as to act as a sturdier and more versatile "sheet". As a note, I've been making about 4 of these every other day or so, even though I haven't been denoting as such on the blog.

 
Thin piece of paper cut out to act as a model. How many times have you seen paper pinned with clothes pins? lol


Measuring out the exact dimensions can be a bit difficult for stranger cuts and locations such as the diagonal corners of the cannon's front, as denoted earlier. As such, I basically did some measurements and trig to get the supposed lengths and sizes for the corners and hoped for the best. A clever trick I used here is that for the triangular flap that's at the end of the half trapezoid, I knew the triangular cut had to have a 1inch leg and a 2.75inch leg so I made a circle with 1inch radius and used a ruler to connect the third leg's endpoint to the point on the curve that made it exactly 2.75inches. As it turns out, which should have been obvious if I had thought about it a bit, that it's just the tangent line to the curve. This part also probably made zero fucking sense so just look at the image. That done, I now had to simply cut out the slice with my X-acto knife.

 
Measuring out the dimensions of the side mount with a test piece of paper (Not using the prepared layered sheets).


That all said and done, I decided my cut was mostly good and just needed a few small adjustments. One of these adjustments was that the triangular flap that went on the front side of the cannon needed to be adjusted a little bit. I accounted for these in my following "final" diagram that I proceeded to cut out and prepare.

That done, I simply pasted it on and I ended up with a little something like this.

 
Not too shabby looking, I'd say.

The rest of the progress done are pretty self-explanatory so I'll just do another gallery style dump here. The remaining images are basically showing the shell-like layering I'm doing for the rest of the body of the cannon and some final shots of the shell covering it except for the final piece which will be visibly missing.

My name is Remi. If you make me angry, I will send out a litle boy named Peter Pan to kick your ass and I like dipping chairs in chicken blood. Props are so tanoshii. I have sinned and poked boba-kun in the eye but he loves me now. I like to walk my pet chimera everyday and sing songs with my imaginary friend Sagua. My favorite ship class is the carrier because they hold all the brand new suzukis and launch flying cars across the ocean.

Day 8

Date: 5/30/15 and 5/31/15
Time spent: ~6 hours

Show/Hide Day 8

These "Day #" namings are kind of dumb because this is the second time I've had two days' worth of updates in "one day" lol. Oh well, too lazy to update sometimes.

Torpedo Tubing

So Day 8 was filled with lots of PVC. Like, lots of PVC. So these two days I've basically been constructing the frames for the torpedo launcher and smoke stack backpack. Surprisingly enough, just doing these two things took a shitton of time because of how much PVC I had to cut, drill, screw and tape. I guess I'll just start in order for now. So first up is the torpedo casing. Since the torpedo encasing, or the tube that houses the actual torpedoes, are lined up in a row of four and immobile, I just went ahead and taped them together in a straight line.

 
Lashing the PVC together that'll act as the torpedo tubes

With the tubes in place without a chance of movement, all I had to do was cut them and be done! Except nothing's ever that simple. The tubes actually ended up moving ever so slightly every time I started cutting a new part of the rack so I had a diagonally uneven cut across the PVCs. I ended up fixing by cutting a bit more diagonally and using filers to even out the pipes. After that, I curved the front tip to be rounded via more filing and then relashed the pipes together with more tape. Not I use gorilla tape, tape for the toughest jobs on earth!

Exhaust Pipe Backpack

So the idea here was basically that just constructing a gigantic backpack that looks like the exhaust pipe thing that a lot of the ships have would be kind of annoying and difficult without making them ridiculously weak and prone to destruction. Since I want to be able to use this cosplay for at least a year, I decided to go absolutely overkill and construct and entire goddamn frame out of PVC for this portion.
 
PVC frame for the exhaust pipe backpack in-progress

So as you can see, this is literally a box frame made from PVC. Techniques I used to construct this are the same as what I used for the joints with the shoulder cannon. Except this time I made it so that it wouldn't really move around via simply positioning of the screws and the inherent nature of a cube.

 
Closer shot of the screws

Obviously though, since you can't really make a ovalular(I didn't know this was a word until I just googled it) frame with a box so I went ahead and lashed together some bendier PVC in an oval around the frame. This was done without any heat bending, I should note. There are multiple types of PVC and while I don't know the names of them at the top of my head, your local Home Depot or similar outlet should definitely have these. You should basically be able to bend the PVC like in the following pictures without too much difficulty. Two of the three rings were definitely a bit difficult and needed the use of pliers to get in-place correctly, but otherwise these should be relatively straightforward.

So with that, I decided to get started on figuring out how to get the actual walls around the frame. For this, I went out and bought 8 pieces of large poster paper. This paper shouldn't be glossy on either side and should only cost like $0.79 per sheet (Which was what I bought them for each).

Since the circumference is a bit too large for a single piece of the poster paper, I got two sheets and lightly taped them together to try and get an estimate on total length required as well as the overlapping portions. This was used in the next step where I basically did the gigantic poster paper version of the paper layering I did on Day 1.

That all said and done... well, I kinda stopped there cuz I just need to wait for the paper to dry overnight at this point.



Notes

Do keep in mind that everything I do here is simply a blog and the information and any tips provided are done so as-is. Don't blame me if you try doing anything I do and you blow up your house or anything. Though if you do somehow manage to blow your house up trying to reproduce my steps, do tell me because I'd be really curious as to how someone could fuck up that badly lol.

Cosplay props are fun.